Hi Folks,
We are trying to configure MFA under Radius using Cisco DUO.
We have done the configuration for MFA in firewall for the same.
Now we are facing some problem such as 'Reason: Invalid username/password. auth profile \'Duo_Auth\', vsys \'vsys1\', server profile \'Duo_Radius\', server address Failed to communicate with any Active Directory server\' From: x.x.x.x'
This is the error coming in system log.
Also when we tried to login with CLI using test authentication authentication-profile auth-profile username & passwork.
We received this below error message.
Target vsys is not specified, user "username" is assumed to be configured with a shared auth profile.
Do allow list check before sending out authentication request... name "username" is in group "all"
Egress: No service source route is set, might use destination source route if configured Authentication to RADIUS server at x.x.x.x:1812 for user "Username" Authentication type: PAP Now send request to remote server ... Authentication failed against RADIUS server at x.x.x.x:1812 for user "Username"
Authentication failed for user "Username"
What could be the cause here let me know what could be done next.
Cheers