Hello good afternoon, as always thanks for the support and collaboration:
I recently added a couple of Raid to m-200, as these were not configured, I made the settings at log setting level to send only configuration and system logs of the firewalls. At the configuration level, everything is fine, from panorama to the firewalls, so that the log setting has the Panorama checkbox.
Everything is fine from the local configuration of the managed collector and the collector group. It appears in the Panorama gui as Connected and In sync, in green everything ok. all ready with the respective commit and push to the local collector. Although it is only one local collector, add the Device Log Forwarding list, all the firewalls and pointing to the local collector, the only one.
The issue is that in Panorama, I go to check the logs, I go to Monitor to the Log part "System" and "Configuration" I see nothing in Panorama, absolutely nothing ... I go to the firewall directly and if there are system and configuration logs.
I have already validated the connectivity and port issues and everything is ok without restrictions.
Infra-environment: Firewalls Pan-os 9.1.4 and M-100 Panorama 9.1.4.
What do you suggest to check, adjust, reboot, restart,etc ?
I remain attentive
Thank you, best regards
Did you tried to restart the mgt server?