PANORAMA does not show the configuration or system logs of the firewalls
Hello good afternoon, as always thanks for the support and collaboration:
I recently added a couple of Raid to m-200, as these were not configured, I made the settings at log setting level to send only configuration and system logs of the firewalls. At the configuration level, everything is fine, from panorama to the firewalls, so that the log setting has the Panorama checkbox.
Everything is fine from the local configuration of the managed collector and the collector group. It appears in the Panorama gui as Connected and In sync, in green everything ok. all ready with the respective commit and push to the local collector. Although it is only one local collector, add the Device Log Forwarding list, all the firewalls and pointing to the local collector, the only one.
The issue is that in Panorama, I go to check the logs, I go to Monitor to the Log part "System" and "Configuration" I see nothing in Panorama, absolutely nothing ... I go to the firewall directly and if there are system and configuration logs.
I have already validated the connectivity and port issues and everything is ok without restrictions.
Infra-environment: Firewalls Pan-os 9.1.4 and M-100 Panorama 9.1.4.
What do you suggest to check, adjust, reboot, restart,etc ?
I remain attentive
Thank you, best regards
Hi @Gabriel Cruz , good afternoon
Yes, it is considered, but in a maintenance window that has not yet been assigned ... so for the moment I can not restart any process or service.
Do you suggest just restart in firewall, in panorama or in both ?
Restarting the process logd in Panorama and log-receiver in the firewalls should not be enough ? or is it necessary to restart all the management-server ( mgmtsrvr ) in both sides, that is to say in Panorama and in the firewalls ? or only in the firewalls ?
I remain attentive, thanks for the collaboration, best regards